-
files/Everlast82i.png
-
files/58c367eefecf6b3b97c6d5fe7a317759_1113x835_1_3c28f588-ba6f-4035-8e40-8b766efaad77.jpg
-
files/6d5293c6a72a9e37c8c7aae8f7a16967_1113x835_1_4399c487-a6a4-4af4-ba9a-6221b0c76b53.jpg
-
files/3de45a2b49e6abd9faeb043384fa6bb4_1113x835_1_084e294f-c754-4f81-b6b1-37d80074b046.jpg
Dimensions: 25 in × 9.5 in × 15 in
Weight: 53 lb
This is a cheaper alternative. However, Hypertherm plasma cutters will give you best cutting quality.
Features & Benefits:
- Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
- Cuts virtually any type of metal with ease
- Simple to use torches with inexpensive service parts and consumables
- Commercial/Industrial class, 60% Duty cycle at 80 amps
- Clean, smooth cuts and improved consumable life with the new Italian designed iPT 80 torch
- Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
- Pilot arc improves performance and cutting on dirty, painted, or rusted metals
- 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
- Adjustable post flow control up to 50 seconds to improve consumable and torch life
- Front air pressure gauge allows quick verification of air pressure
- Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
- IGBT modules improve reliability and performance while reducing overall weight
- CNC socket and CNC torch for plasma table use.
What's included:
- 25ft. Italian designed and patented iPT 80 CNC torch with Euro quick-connect central adapter
- Work clamp with 10ft. cable and DINSE connector
- Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
- Consumable starter kit
Tech Specs:
Type:
IGBT
Voltage/phase:
220/240 V 1 Phase
Output Amp/Volt Range:
20-80A/88V-112V
OCV:
240V
Max Inrush ( I1MAX ) Amps:
- @ 240V: 58A
Maximum Rated (I1EFF ) Input Amps:
- @240V: 45.2A
Duty Cycle At Rated Amps/Volts:
- 60% @ 80A/112V
- 100% @ 63A/105V
Arc Start Type:
Blow Back (Piston type)
PilotArc:
Yes
Torch Type:
Italian designed iPT 80 machine torch
(Hand torch not included)
CNC Interface Port:
Yes
Adjustable Post Flow Timer:
Yes
Gouging:
Light to Medium
Recommended Cutting Air Pressure:
75psi
Recommended Compressor Capacity:
7CFM @ 90 psi/60 gallon tank
OK-to-Cut Indicator/Low Air pressure safety:
Yes
- Regular price
- $1,850.00
- Sale price
- $1,600.00
Frequently Bought Together
-
Premier Plasma CNC FT4896 Series 4'x8' Turnkey System
Sale price From $6,875.00Regular price $8,175.00 -
Hypertherm Powermax 45 XP #088121 Machine System CPC 25' Leads
Sale price $2,795.00Regular price $3,100.00 -
Premier Plasma Router Kit for all tables.
Sale price From $395.00Regular price $500.00 -
Premier Plasma CNC ROTARY PIPE CUTTER ATTACHMENT.
Sale price $1,895.00Regular price $2,500.00
Total price
$13,560.00
$369.99
Product Description
Dimensions: 25 in × 9.5 in × 15 in
Weight: 53 lb
This is a cheaper alternative. However, Hypertherm plasma cutters will give you best cutting quality.
Features & Benefits:
- Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
- Cuts virtually any type of metal with ease
- Simple to use torches with inexpensive service parts and consumables
- Commercial/Industrial class, 60% Duty cycle at 80 amps
- Clean, smooth cuts and improved consumable life with the new Italian designed iPT 80 torch
- Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
- Pilot arc improves performance and cutting on dirty, painted, or rusted metals
- 3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
- Adjustable post flow control up to 50 seconds to improve consumable and torch life
- Front air pressure gauge allows quick verification of air pressure
- Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
- IGBT modules improve reliability and performance while reducing overall weight
- CNC socket and CNC torch for plasma table use.
What's included:
- 25ft. Italian designed and patented iPT 80 CNC torch with Euro quick-connect central adapter
- Work clamp with 10ft. cable and DINSE connector
- Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
- Consumable starter kit
Tech Specs:
Type:
IGBT
Voltage/phase:
220/240 V 1 Phase
Output Amp/Volt Range:
20-80A/88V-112V
OCV:
240V
Max Inrush ( I1MAX ) Amps:
- @ 240V: 58A
Maximum Rated (I1EFF ) Input Amps:
- @240V: 45.2A
Duty Cycle At Rated Amps/Volts:
- 60% @ 80A/112V
- 100% @ 63A/105V
Arc Start Type:
Blow Back (Piston type)
PilotArc:
Yes
Torch Type:
Italian designed iPT 80 machine torch
(Hand torch not included)
CNC Interface Port:
Yes
Adjustable Post Flow Timer:
Yes
Gouging:
Light to Medium
Recommended Cutting Air Pressure:
75psi
Recommended Compressor Capacity:
7CFM @ 90 psi/60 gallon tank
OK-to-Cut Indicator/Low Air pressure safety:
Yes
Customer Reviews
It just based off of preference and budget ! My choice was premier plasma turn key and iv been all but happy and financially gaining since iv turn the computer on .. Thank U premier plasma Team !
Jesse Cuara
---------------------Couldn’t be happier with my 4x4 and 45xp. Been a long time coming having to wait weeks for laser company to cut my generic gussets and mounting plates. This is a game changer for my business and it’s only been 2 weeks since my first cut 👌🏼
Branding Stevens
4LoFabs
Overall, happy with the machine, and it’s paid for itself 100x over. 2+ years here. Run it 40 hour a week in a production setting. No complaints. I keep my computer offline so it doesn’t do any updates. After 2 years of running, I recently replaced roller bearings.
Daniel Chaffee
6 Monkeys Fab
2,000+
Happy Customers
Similar Products
-
Premier Plasma CNC FT60120 Series 5'x10' Turnkey System
Sale price From $8,060.00Regular price $9,360.00 -
Premier Plasma CNC REG510 Series 5'x10' Turnkey System
Sale price From $7,640.00Regular price $8,940.00 -
Premier Plasma CNC FT4896 Series 4'x8' Turnkey System
Sale price From $6,875.00Regular price $8,175.00 -
Premier Plasma CNC PR510 CNC Router Table
Sale price From $6,800.00Regular price $8,100.00
