Dimensions: 25 in × 9.5 in × 15 in

Weight: 53 lb

This is a Cheaper alternative. However, Hypertherm plasma cutters will give you best cutting quality.

Features & Benefits:

Comes with CNC torch (Hand torch not included)
Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
Cuts virtually any type of metal with ease
Simple to use torches with inexpensive service parts and consumables
Commercial class, 60% Duty cycle at 60 amps for CNC use
Clean, smooth cuts with the genuine iPTM 60 CNC torch
Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
Pilot arc improves performance and cutting on dirty, painted, or rusted metals
3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
Front air pressure gauge allows quick verification of air pressure
Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
Adjustable postflow timer for maximum consumable life
IGBT components improve reliability and performance while reducing overall weight
CNC socket for CNC use on plasma tables with included machine torch
Suitable for use with 11,000 W "clean power" generators.

What's Included:

25ft. Italian designed and patented iPT 60M CNC torch with Euro quick-connect central adapter
Work clamp with 10ft cable and DINSE connector
Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
Consumable starter kit.

Tech Specs:

Type:

IGBT

Voltage/phase:

220/240 V 1 Phase

Output Amp/Volt Range:

20-60A; 88-104V

OCV:

240V

Max Inrush ( I1MAX ) Amps:

41A

Maximum Rated (I1EFF ) Input Amps:

32.4A

Duty Cycle At Rated Amps/Volts:

Arc Start Type:

Blow Back (Piston type)

PilotArc:

Yes

Torch Type:

Italian designed iPT 60 CNC machine torch

CNC Interface Port:

Yes

Adjustable Post Flow Timer:

Yes

Gouging:

Light to Medium

Recommended Cutting Air Pressure:

75 psi

Recommended Compressor Capacity:

6CFM @ 90 psi/ 30 gallon tank

OK-to-Cut Indicator/Low Air pressure safety:

Yes

Everlast 62i With CNC Package