Dimensions: 25 in × 9.5 in × 15 in

Weight: 53 lb

This is a cheaper alternative. However, Hypertherm plasma cutters will give you best cutting quality.

Features & Benefits:

Easy starting with Blow Back Pilot arc allows easy cutting of rusty and painted metals
Cuts virtually any type of metal with ease
Simple to use torches with inexpensive service parts and consumables
Commercial/Industrial class, 60% Duty cycle at 80 amps
Clean, smooth cuts and improved consumable life with the new Italian designed iPT 80 torch
Blowback start starts arc without the need of High Frequency which can interfere with surrounding electronics
Pilot arc improves performance and cutting on dirty, painted, or rusted metals
3 Second pilot arc tip saver feature shuts down pilot arc after 3 seconds of contiuous operation if no cutting is present to prevent premature consumable wear
Adjustable post flow control up to 50 seconds to improve consumable and torch life
Front air pressure gauge allows quick verification of air pressure
Over Current and Duty Cycle protection indicates fault with a dedicated warning/diagnostic light, and shuts down output until condition is resolved
IGBT modules improve reliability and performance while reducing overall weight
CNC socket and CNC torch for plasma table use.

What's included:

25ft. Italian designed and patented iPT 80 CNC torch with Euro quick-connect central adapter
Work clamp with 10ft. cable and DINSE connector
Air pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)
Consumable starter kit

Tech Specs:

Type:

IGBT

Voltage/phase:

220/240 V 1 Phase

Output Amp/Volt Range:

20-80A/88V-112V

OCV:

240V

Max Inrush ( I1MAX ) Amps:

Maximum Rated (I1EFF ) Input Amps:

Duty Cycle At Rated Amps/Volts:

Arc Start Type:

Blow Back (Piston type)

PilotArc:

Yes

Torch Type:

Italian designed iPT 80 machine torch

(Hand torch not included)

CNC Interface Port:

Yes

Adjustable Post Flow Timer:

Yes

Gouging:

Light to Medium

Recommended Cutting Air Pressure:

75psi

Recommended Compressor Capacity:

7CFM @ 90 psi/60 gallon tank

OK-to-Cut Indicator/Low Air pressure safety:

Yes

Everlast 82i With CNC Package